通达信macd指标选股（macd底部金叉选股指标）

1、求通达信的选股公式，条件是MACD大于零。

{通达信中到目前为止系统还不支持60分钟、30分钟的选股平台，只能给你MACD日线选股。}
DIF:=EMA(C,12)-EMA(C,26);
DEA:=EMA(DIF,9);
MACD:=2(DIF-DEA);
MACD>0;
{上面的选股是你要的日线MACD大于0的选股公式，这一公式选出的股票一般都有一段涨幅了，我猜想你可能是要DIF红线上穿DEA黄线的选股吧。所以我帮你做了下面另一个公式}
DIF:=EMA(C,12)-EMA(C,26);
DEA:=EMA(DIF,9);
MACD:=2(DIF-DEA);
CROSS(DIF,DEA);

2、请老师编写一个macd的选股公式通达信的谢谢

DIFF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=2(DIFF-DEA);
SX:=BARSLAST(CROSS(DEA,DIFF))+1;
JX:=BARSLAST(CROSS(DIFF,DEA))+1;
T1:=IF(JX=1 AND DIFF>REF(DIFF,REF(JX,1)+1),1,0);
T2:=IF(JX=1 AND LLV(DIFF,SX)>REF(LLV(DIFF,SX),SX),1,0);
XG:T1 OR T2;

3、求通达信公式macd选股公式

DIF:=EMA(CLOSE,12)-EMA(CLOSE,26);

DEA:=EMA(DIF,9);

MACD:=(DIF-DEA)2;

X1:DIF>REF(DIF,1) AND V>=MA(V,50),COLORRED;

X2:MACD<REF(MACD,1),COLORGREEN;

这样的条件设计会信号过多,而且,出现两条件重叠情况.

4、通达信MACD指标改为选股器

{冲锋号角}
B1:=IF(CLOSE AND MA(VOL,5)/240 AND CLOSE>REF(CLOSE,1)1.0 AND CLOSE,88,0);
B2:=IF(CLOSE/REF(CLOSE,1)>1.050 AND VOL/CAPITAL100<15 AND CLOSE<17 AND HIGH/CLOSE<1.010 AND B1>0,91,0);
去除ST:=EXIST(C/REF(C,1)>1.055,60);
去除停牌:=DYNAINFO(4)>0;
去掉新股:=BARSCOUNT(CLOSE)>30;
冲锋号角:B2>90 AND 去除ST AND 去除停牌 AND 去掉新股;

{狙击导线穿伏击阵地}
B3:=(CLOSE-LLV(LOW,10))/(HHV(HIGH,10)-LLV(LOW,10))1000;
B4:=EMA(B3,1);
B5:=EMA(B4,100);
B6:=3B4-2B5;
B7:=EMA(B6,5)/10;
狙击导线:=EMA(B7,1);
伏击阵地:=IF(B7<15,35,0);
去除ST:=EXIST(C/REF(C,1)>1.055,60);
去除停牌:=DYNAINFO(4)>0;
去掉新股:=BARSCOUNT(CLOSE)>30;
XG:CROSS(狙击导线,伏击阵地) AND 去除ST AND 去除停牌 AND 去掉新股;
股票公式专家团为你解答，希望能帮到你，祝投资顺利。

5、macd二次低位金叉选股公式

DIFF:=EMA(CLOSE,12)-EMA(CLOSE,27);
DEA:=EMA(DIFF,9);
MACD:=2(DIFF-DEA);
JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));
二次金叉:CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1;
{已测试，复制可直接引用，如果回答满意，请记得给采纳}

6、macd低位三次金叉选股公式通达信

DIFF:=EMA(CLOSE,12)-EMA(CLOSE,27);DEA:=EMA(DIFF,9);
MACD:=2(DIFF-DEA);
JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));
三次金叉:CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=3,21)=1;

7、请求各位帮忙——通达信软件macd底部线、柱背离且金叉的选股公式。

DIF:=((EMA(CLOSE,26)-EMA(CLOSE,12)))-1;
DEA:=EMA(DIF,9);
A1:=BARSLAST(REF(CROSS(DIF,DEA),1));
底背离:REF(CLOSE,A1+1)>CLOSE AND DIF>REF(DIF,A1+1) AND CROSS(DIF,DEA),STICK,;
STICKLINE(底背离,0,1,2,0),COLOR00FF00;
DRAWTEXT(底背离,1,'底背离'),COLORFF00FF;